May 4

Steampunk Lightning Detector MARK-II

So I have been building not one, but two new Lightning Detectors similar in some respects the my original “MARK-I” unit.

These use a new circuit from Charles Wenzel, that is somewhat simpler than the original, however does not have all of the neat options that the original possessed (namely the sound, metering, etc.) These detectors however had a more exotic and Steampunk feeling mixed with some “Alchemy” and Ghostly detection capabilities..

Magick, if you will.

Anyway, To the pics and circuitry. I wont bore you with too much text about how the build progressed, it was slow going just like before.

IMG_20150426_122154752

The completed Alchemical Steampunk Detector.

ess1427159800846

The two detectors partially built.

IMG_20150426_122115156

Frontal view of the completed Detector.

IMG_20150426_122125915_HDR

Side View.

IMG_20150426_122135001_HDR

Close up of the “Ghost Crystal”

IMG_20150426_122146588

Side View showing Hermetic Symbols of Alchemical Knowledge…

IMG_20150321_101955812

Winding the Basket Coils.

IMG_20150321_103547294

The straws make it simple to slide off. Remember there must always be an odd number of winding spikes (nails in this case).

IMG_20150321_104502232

A little hot glue at the crossover points and the coil slips off in 1 piece. Ready for matte black paint.

Finally, here is the circuit I used for the detector. As mentioned above, it is a bit simpler than the MARK-I, but has less capabilities.

LD2_Circuit

That is all for now! If you want one of these you can buy it from my Etsy Store unless they are all gone, then you will have to have me build you one – which will take some time I’m afraid….

September 21

Building the Steampunk Lightning Detector…

The Steam-punk Lightning Detectors that I sell on Etsy (See my Etsy Store badge on the right) were created using a modified form of the lighting detectors found at the TechLib.com, designed by Charles Wenzel.

lightnew2sch

The basic circuit is shown above, However I made some changes for the Steam-punk version.

This unit contains about 100 man hours of work to produce the Victorian appearance of age in the stain, the brass, steel, leather, and glass of the detection lamp assembly and wooden base etc.  True working Steam-Punk art is not cheap and there is a good reason – it is hard to build!

But for the real Steam-Punk aficionado looking for a piece that really works, this unit is a must have.  Visit my Etsy store if you are interested. (Special note: This particular unit was sold in just a few weeks after posting, so if you want to order one, just go to the shop and send me a message.  I am currently  as of 03/13/2015 building two more detectors, one under commission, and one that I intend to sell).

Now… onto the build itself.

Lightning_Detector_4

The parts laying about before assembly…

Aging and staining the wood for the base took nearly 2 weeks of solid work to get the right look I was going for: A cherry stain that looked like it had been around for sometime. Everything else had to be in period materials from leather in the base of the Cobalt Blue Lamp assembly – the blue glass itself, all connectors and art-worked pieces had to be of brass if at all possible or other metals.

Lightning_Detector_3

The Cobalt Blue Detection Lamp Assembly…

The lamp tube is cut from a blue bottle. That took three tries with my expensive bottles… The base is a solid cast brass candle base.The top and ball are from old door-knobs and Victorian curtain assemblies. Threaded brass rod, springs, leather complete the unit.

Lightning_Detector_2

The Circuitry before insertion into the base of the Lamp Assembly…

Using “dead-bug” style circuit assembly procedure, (and after verification of the circuit) everything was encased in a wax base to keep parts from moving once assembled into the base. The small black unit is the hidden speaker that is used to announce approaching lightning or, to allow the “Voices of the Aether’s” to speak forth – in other words, if you take this unit to the northern regions when the Aurora Borealis is up, you will hear it’s weird moaning in this speaker.  Or perhaps if you take it to your local cemetery you can hear ghosts there as well… who knows?

Lightning_Detector_9

The controls Close-up

The switch allows near and far detection. The control knob changes the Q of the coil for allowing more tight tuning of the strikes.

Lightning_Detector_8

The Final Product…

And the final product is a wonder to behold! Again, about 100 man hours of work here!

Below is a video of the Detector in action…The sound you hear is the rain pounding on my castle laboratory, and my evil cat (“Kitty”*) meowing in the background! And Thunder too…

*Actually, Kitty is not evil, she just likes to lay on whatever it is you are working on. I guess that is fairly typical of a cat.